Austauschbarkeit von Schaltketten bei Sturmey-Archer Nabenschaltungen/Tabelle von Schaltkettenmaßen

Aus WikiPedalia


Zapfenlängen sind auf den nächsten Millimeter gerundet. Danke an Jan Blaha, Dan Burkhart, Tony Hadland, Elton Pope-Lance, Howard Sutherland, eBay Verkäufer cyclingcolors_france und David Prosser von Sturmey-Archer für einige Maße. Spezieller Dank geht an Bruce Dance für seine vielen Anregungen und Korrekturen.

Click on the link below to switch the order in the table between part number and spindle length. You may have to double-click the first time.

Click here to switch table ordering Table sorted by part number -- click on link above to sort by spindle length. Thick indicator spindles are listed first, then thin ones. Thick ones will not work in some hubs. Thin ones will work in any hub if the length is OK.

Teilenummer Nabentyp Nabe:
R-rechts
L-links
Achslänge Ende Gewinde bis Schulter (mm) Markierung Ende Gewinde bis Markierung (mm)
HSA125,
K.504
Ältere Nabe, Kurze Achse AW 5¾" 47-49 I 47-49
AG, AB
AT3 162,7mm
AT5 R 155,6mm
TCW 146mm
SAB 146mm
S5 5¾"
S5.1 R 5 13/16"
S5/2 R 5 7/8"

HSA126, K.504A Older hubs, longer axle AT5 R all dates 6 3/8" 56 II 56 AW old 6¼" AWC 152mm S3C 152mm SAB 159mm TCW 159mm S5 6", 6¼" S5.1 R 6 1/16, 6 5/16" S5.1 L., SRF3

5 13/16, 6 1/16" S5/2 R all dates 6 1/8", 6 3/8" S5/2 L before 8-88 5 7/8", 6 1/8" HSA315 Newer 3-speeds AW new, SRF3 6¼" 59 III 59 AWC 159mm S3C 159mm X-RD3, AB3, SAB3, S-RF3 163mm SX-RK3 215mm SX-RB3 215mm TS-RF3 163mm HSA316, K.504B Newer 3-speed coasters, 5-speed left, 5-Star AT5 L before 8-88 6 1/8", 6 3/8" 62 IIII, IV 62 AWC 163mm, 6.4" AWC(II) 163mm S-RC3(II) 163mm XL-RD3 177mm TS-RC3 163mm S5.1 L 6 5/16" S5/2 L before 8-88 6 3/8" 5-Star 5-Star Elite HSA420 Newer 3-speed coasters with longer axle, 5-speed left S5/2 L after 8-88 6 1/8" 66 V 66 AWC, new AW, S-RF3 175mm, 7" S-RC3, S-RC3(II) 175mm QS-RC3 175mm AWC(II), 175mm S-RB3, AWB 185mm HSA 421 5-speed left S5/2 L after 8-88 6 3/8" 72 VII 72 AT5 after 8-88 6 1/8", 6 3/8" HSA453 5-Speed 5-Star left 161.9mm 89 89 HSA615 ? ? ? 40 VI 40 HSA715 Disk brake 3-speeds S-RK3, S-RK3(N) Not stated 69 IX 69 HSA716 F30 series, hybrid gearing CS-RF3 179mm 75 VIII ? (Mark is on chain.) CS-RK3 179mm Part number Hub type Hub - R: right; L left: Axle length Base of threads to shoulder, mm Mark Base of threads to mark, mm HSA317 Ball-locking 5-speeds X-RD5, AB5 185mm 59 Light Blue 59 HSA490 1990s dog-locking 5-speeds Sprinter S5. 67 Red 64 Sprinter Elite/AT5 Sprinter S5C SAB-5 Not AB5 HSA585 Dog-locking 5-speeds X-RC5(W) 175mm 71 Yellow 68 S-RC5(W) SRC5(N) XL-RD5(W) X-RD5(W) X-RF5 S-RF5(W) HSA651 Dog-locking 5-speeds S-RF5(W) 148mm 57 Green 63 S-RF5(N) HSA652 Fixed gear S3X with short guide nut 165mm 62 Orange after 1/2 link 68 HSA653 Fixed gear S3X with short or long guide nut 174mm 62 White after full link 76 HSA712 AB (new) 175mm 61 Navy Blue 67 HSA713 Fixed gear S3X - use long guide nut 165mm 61 Orange after full link 71 HSA714 Fixed gear S3X - use long guide nut 174mm 71.5 White after 1/2 link 75.9 HSA717 Newer 5-speeds X-RF5(W) 185mm 71 Purple 76 S-RF5(W) w/HMN420 short guide nut; X-RK5(W), X-RK5(N) S-RK5(N) S-RK5(N) Part number Hub type Hub - R: right; L left: Axle length Base of threads to shoulder, mm Mark Base of threads to mark, mm

The parts list for the AB5 on the Sturmey-Archer Heritage site gives HSA490 for the indicator spindle. This is almost certainly incorrect; several other part numbers also. Except for the 90mm brake assembly and steel shell, the parts shown in the drawing for the AB5 are identical to those for the X-RD5. These are both ball-locking hubs and the correct indicator spindle is HSA317.


Quelle

Dieser Artikel basiert auf dem Artikel Sturmey-Archer Indicator Spindle Compatibility von der Website Sheldon Browns. Originalautor des Artikels ist Sheldon Brown.