Sturmey-Archer Naben: Unterschied zwischen den Versionen

Aus WikiPedalia
K (→‎Vier Gänge: siehe groß)
(→‎Fünf Gänge (1967-2000): Tabellenrumpf eingefügt)
Zeile 328: Zeile 328:


===Fünf Gänge (1967-2000)===
===Fünf Gänge (1967-2000)===
;Siehe auch
* [[Wartung von Sturmey-Archer Vier-, Fünf- und Siebengangnaben]]
{| {{Prettytable|width=50%}}
!Model !!Speeds !!Range !!Gears(%) !!Features
|-
|}


===Fünf Gänge (ab 2000)===
===Fünf Gänge (ab 2000)===

Version vom 15. Oktober 2013, 06:16 Uhr

Dieser Artikel wrid gerade übersetzt
Da dieaser Artikel gerade übersetzt wird, bitte etwas Geduld aufbringen bis nach Fertigstellung dieser Hinweis verschwindet --Bikegeissel 10:04, 11. Okt. 2013 (UTC)


Old English Almost all English 3-speeds have Sturmey-Archer rear hubs, and there have been many different models since the company started in 1902. Sturmey-Archer was a division of Raleigh Industries until autumn, 2000, when the parent company ran into financial difficulties. Sturmey-Archer (U.K.) was rendered homeless by various corporate maneuvers. For a while it appeared that it would disappear entirely into bankruptcy. The land the factory stood on was sold, and Sturmey-Archer was nearly liquidated by a corporate raider. Fortunately, a Taiwanese company called SunRace came to the rescue, and bought the company assets more or less intact. The machinery and stock were moved to Taiwan. SunRace resumed production of Sturmey-Archer hubs -- some pre-existing models, many new ones.

Sturmey-Archer quality had been on a downward slide since the early 1960s, as the company's engineering efforts shifted from trying to make a better product, as they had been through the first half century, to finding ways to make an acceptable product cheaper. Sturmey-Archer's quality peaked probably in the late '50s.

SunRace spent a great deal of money moving the machinery from England to Taiwan, but when it arrived, it turned out that most of the machinery was worn-out junk, no longer capable of manufacturing parts to the degree of precision appropriate to the 21st century.

I heard an interesting anecdote from a Sturmey-Archer veteran employee, now with SunRace/Sturmey-Archer: Back in the day, sometimes a batch of internal parts would be just a bit out of tolerance, maybe a bit too small, or a bit too large, whatever. The production people would take a sample to the engineering department, where a grey-haired engineer would check it out and often say "Well, it is a bit out of spec, but not really enough to cause failure, so let's let it go."

SunRace didn't have those engineers who had grown up with Sturmey-Archer in their blood, so when they found a batch of out-of-spec parts, they would say "That's out of spec! Melt it down, and make new ones, and do it right this time!"

In any case, the quality of Taiwanese production from SunRace/Sturmey-Archer so far has been excellent, generally better than the quality of later English production. Sturmey-Archer's selection of multi-speed hubs is much wider than that of the other manufacturers. Sturmey-Archer hubs tend to be lighter than the competitors'. SunRace has also introduced many new models, including an 8-speed internal-gear hub, a fixed-gear three-speed and an updated version of the Dynohub generator. Many Sturmey-Archer hubs -- even the 8-speed -- can fit the narrow dropout spacings of older bicycles. .

Some folks don't believe that the Taiwanese can make stuff as well as the British did, but there's no factual basis for that belief, and in many cases this attitude may be traced to racism.

Aktuelle Sturmey-Archer Modelle und die meisten anderen seit den 1930er Jahren

Cells with pink backgrounds identify current models as of 2010.

Quick Reference
2-speeds 3-speeds 4-speeds
5-speeds 1967-2000 5-speeds 2000- 7-speeds
8-speeds 1-speed brake hubs Front hubs
Individual models
Links to individual models are mostly for older models.
AB AB/C AC AG AM AR ASC AT3 AW AWC BF BFC
BF/C BFT BR BRC BRT FB FC FG FM FW GH6 K
KB KBC KS KSW KT KTC S5 S5-2 S3C SAB3 SBF SBR
Spr.5 Spr.7 ST SW T TB TBC TBF TBFC TCW TF VT

Naben mit Nabenschaltung

Zwei Gänge

Model Speeds Range Gears(%) Features

B2C

2 Wide 138
100
2-speed kickback hub, coaster brake, steel shell. Also see coaster-brake page.

S2C

2 Wide 138
100
2-speed kickback hub, coaster brake, aluminum shell. Also see coaster-brake page.

S2

2 Wide 138
100
2-speed kickback hub, no brake, aluminum shell.

S2 (1960)

2 Wide 100
71.4
Note, same model number as new S2 but different ratios. 1960s model with kickback shifting

T

2 Medium 100
75
A rare 1930s model, made for club bicycles and tandems.

If you have a fast connection, you can see
sales brochures for this model.

TB

2 Wide 100
75
A rare 1930s two-speed hub with cable/rod-operated drum brake. Similar to TBC

If you have a fast connection, you can see
sales brochures for this model.

TBC

2 Wide 100
75
A rare 1930s two-speed hub with cable-operated drum brake. Similar to TB

If you have a fast connection, you can see
sales brochures for this model.

TBF

2 Wide 100
75
A rare 1930s fixed gear two-speed hub with cable/rod-operated drum brake. Similar to TBFC

If you have a fast connection, you can see
sales brochures for this model.

TBFC

2 Wide 100
75
A rare 1930s fixed gear two-speed hub with cable-operated drum brake. Similar to TBF

If you have a fast connection, you can see
sales brochures for this model.

TC

2 Close 100
86.54
A rare 1930s model, made for club bicycles.

See: sa-1938f2.jpeg (176k)
If you have a fast connection, you can see
sales brochures for this model.

TF

2 Medium 100
75
A rare 1930s fixed gear model, made for club bicycles and tandems. The fixed-gear version of the T

Sturmey-Archer TF
If you have a fast connection, you can see
sales brochures for this model.

Drei Gänge

Siehe auch

Wartung von Sturmey-Archer 3-Gang Naben

Model Speeds Range Gears(%) Features

AB

3 Wide 133.3
100
75
Basically an AW, with cable-operated drum brake.

AB3

3 Wide 133.3
100
75
With cable-operated 90 mm drum brake. Still sold in 2010.

AB/C

3 Wide 133.3
100
75
With cable-operated 90 mm drum brake. Still sold in 2010.

AC

3 Close 106.66
100
93.3
A rare model, made for club bicycles, time trials.

AG

3 Wide 133.3
100
75
Basically, an AW with a built-in Dynohub generator.

AM

3 Medium 115.55
100
86.54
A rare model, made for club bicycles.

AR

3 Ultra Close 107.24
100
93.24
A very rare 1930's model, made for club/racing bicycles.

Sturmey-Archer AR If you have a fast connection, you can see sales brochures for this model.

ASC

3 Close 100
90
75
Fixed gear. Extremely rare, and lots of fun! This site has two separate pages devoted to this hub: See the main ASC Page for general info, and the ASC Tech Page for service instructions, cutaway and exploded diagrams.

In 2010, SunRace/Sturmey Archer has introduced a new 3-speed fixed gear hub, the S3X

AT3

3 Wide 133.3
100
75
"Elite" 70 mm drum brake and no-intermediate-gear (no neutral) internals. "Elite" indicates a hub with an aluminium shell.

AW

3 Wide 133.3
100
75
This is far and away the most common model, introduced in 1936. No-neutral-gear version still sold in 2010 --75th anniversary is coming up in 2011! Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs.

AWC

3 Wide 133.3
100
75
Three speed coaster brake. No-neutral-gear version. Steel shell. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs.

AWC(II)

3 Wide 133.3
100
75
Slight modification to the AWC. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs.

CS-RF3

3 Wide 133.3
100
75
Hybrid gearing, fits a Shimano or SRAM 8- or 9-speed cassette.

BWR

3 Extra-wide 63.8
100
156.7
Special Brompton extra wide-ratio 3-speed used with 2 sprockets and a rear derailer to make a 6-speed hybrid-gearing system.

CS-RK3

3 Wide 133.3
100
75
Hybrid gearing, fits a Shimano or SRAM 8- or 9-speed cassette. Disk brake fitting

K

3 Wide 133.3
100
75
The immediate predecessor of the AW

If you have a fast connection, you can see sales brochures for this model.

KB

3 Wide 133.3
100
75
With rod-operated drum brake. (Similar to the KBC)

If you have a fast connection, you can see sales brochures for this model.

KBC

3 Wide 133.3
100
75
With cable-operated drum brake. 1930's predecessor to the AB

Sturmey-Archer KBC If you have a fast connection, you can see sales brochures for this model.

KS

3 Close 112.5
100
89.9
A rare 1930s model, made for club bicycles and tandems.

Sturmey-Archer KS If you have a fast connection, you can see sales brochures for this model.

KSW

3 Medium 116.6
100
85.7
A rare 1930s model, made for club bicycles and tandems.

Sturmey-Archer KS If you have a fast connection, you can see sales brochures for this model.

KT

3 Wide 133.3
100
75
Tandem hub with cable/rod-operated drum brake. Similar to KTC

Sturmey-Archer KT If you have a fast connection, you can see sales brochures for this model.

KTC

3 Wide 133.3
100
75
Tandem hub with cable-operated drum brake. Similar to KT

If you have a fast connection, you can see sales brochures for this model.

QS-RC3

3 + reverse Wide 133.3
100
75
Coaster brake, aluminum shell, reverse gear and second sprocket, made for a tricycle. This is a gearbox, not a hub and must be used in an intermediate position on the frame, with two chains, because the secondary sprocket attaches where the spokes would.

RS-RF3

3 Wide 133.3
100
75
New version similar to the AW, with an aluminum shell. Rotary shifting interface inside the dropout; no brake.

RX-RD3

3 Wide 133.3
100
75
New version similar to the AW, with an aluminum shell. Rotary shifting interface inside the dropout; 70mm drum brake

SAB3

3 Wide 133.3
100
75
Steel shell, 70mm drum brake. No-intermediate-gear mechanism. Still sold in 2010

SBR

3 Wide 133.3
100
75
"Steelite" with 70 mm drum brake.

"Steelite" indicates a hub with a steel shell.

S3C

3 Wide 133.3
100
75
Coaster brake. After Consumer Reports rated the TCW IV "unacceptable" because the brake would fail completely if the shift cable was misadjusted, Sturmey-Archer completely redesigned the Tricoaster, so that the braking was independent of the gear-change. This model is safer than the TCW series, but is still prone to failure. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs.

S3X

3 Mid 100
75
62.5
SunRace/Sturmey-Archer's new-production 3-speed fixed gear, supplanting the rare ASC. A matching front hub, the HBT, is available.

S-RC3

3 Wide 133.3
100
75
Aluminum-shell version of the AWC(II), with coaster brake.

S-RF3

3 Wide 133.3
100
75
New version similar to the AW, with an aluminum shell. Improved pullchain interface; no brake.

SW

3 Superwide 138.4
100
72.23
This model was intended to replace the AW in 1957, but was so troublesome that it was withdrawn, and the AW re-introduced in 1958. The SW uses a unique 3-prong driver, and has crescent shape pawls that don't use pawl springs. When they work, they're very nice. They are light, nearly silent, and efficient. None of the internal parts are interchangeable with other models. See Brian Hayes's article on this site.

SX-RB3

3 Wide 133.3
100
75
Wide-body 3-speed (for wide dropout spacing) with threads on left side for band brake drum or sprocket.

SX-RK3

3 Wide 133.3
100
75
Wide-body 3-speed (for wide dropout spacing) with fitting for brake disk.

TCW

3 Wide 133.3
100
75
Coaster brake. Mark I, II, III, IV. Unreliable, replaced by the S3C. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs.

TS-RC3

3 + reverse Wide 133.3
100
75
Coaster brake, high-polish aluminum shell, reverse gear and second sprocket: made for a tricycle. This is a gearbox, not a hub, and must be used in an intermediate position on the frame, with two chains, because the second sprocket attaches at the spoke holes on the right side.

TS-RF3

3 Wide 133.3
100
75
No brake, high-polish aluminum shell, reverse gear and second sprocket: made for a tricycle. This is a gearbox, not a hub, and must be used in an intermediate position on the frame, with two chains, because the second sprocket attaches at the spoke holes on the right side.

XL-RD3

3 Wide 133.3
100
75
90 mm drum brake, aluminum shell.

X-RD3

3 + reverse Wide 133.3
100
75
70 mm drum brake, aluminum shell.

Vier Gänge

Siehe auch
Model Speeds Range Gears(%) Features

FB

4 Wide 126.6
100
79.9
66.67
With cable-operated drum brake. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs.

FC

4 Close 109.1
100
90
75
A rare model, made for club bicycles.

FG

4 Wide 126.6
100
79.9
66.67
Basically an FW with a built-in Dynohub generator.

I have one of these on my 1954 Superbe Roadster. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs.

FM

4 Medium 112.5
100
85.7
66.7
A rare model, made for club bicycles.

FW

4 Wide 126.6
100
78.9
66.67
The most common four-speed model. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs.

Fünf Gänge (1967-2000)

Siehe auch
Model Speeds Range Gears(%) Features

Fünf Gänge (ab 2000)

Sieben Gänge

Acht Gänge

Ein Gang Bremsnaben

Vorderradnaben

BF

Formerly, drum brake for rod operation (similar to BFC) Now this name is used for a 90mm cable-operated drum brake (current model).

If you have a fast connection, you can see
sales brochures for this model.

BFC

Drum brake for cable operation (similar to BF).

If you have a fast connection, you can see
sales brochures for this model.

BF/C

90 mm drum brake for cable operation (current model is called the BF but refers to this one's technical info.)

BFT

Tandem drum brake for cable operation (similar to BFC)

If you have a fast connection, you can see
sales brochures for this model.

HBT

Front track hub to match the S3X fixed-gear hub. Available in several colors.

GH6

Front hub with built-in Dynohub generator.

SBF

70 mm "Steelite" drum brake for cable operation (current model)

VT

70 mm "Elite" drum brake for cable operation

X-FD

Front hub with 70mm drum brake.

X-FDD

Front hub with 70mm drum brake and new-model Dynohub generator.

XL-FD

Front hub with 90mm drum brake

XL-FDD

Front hub with 90mm drum brake and new-model Dynohub generator.

X-SD

Front single-side (tadpole tricycle front) hub with 70mm drum brake.

XL-SD

Front single-side (tadpole tricycle front) hub with 90mm drum brake.

Siehe auch


Quelle

Dieser Artikel basiert auf dem Artikel Sturmey-Archer Bicycle Hubs von der Website Sheldon Browns. Originalautor des Artikels ist Sheldon Brown.